Miller Electric Axcess 450 Manuel d'utilisateur télécharger pdf (Page 10)

DeviceNet Interconnecting Feeder

Control Cables

#195 240 5 ft (1.5 m)

#195 241 10 ft (3 m)

#195 242 25 ft (7.6 m)

#195 243 50 ft (15.2 m)

These specially designed EMI (Electrical

Magnetic Interference) protected and shielded

feeder control cables are required, but not

included with Axcess feeders or ROI. Determine

length needed and order separately.

Motor Control Cables

#300 097 20 ft (6.1 m)

#300 096 30 ft (9 m)

#300 098 50 ft (15.2 m)

Includes overmolded connections on high-flex

cables for optimal service life.

Axcess

Feeder

Base and

Spool Support

#195 369

Sheet metal

construction.

Allows mounting

of AA-40GB

motor (if desired)

when using ROI option or when using an Auto-

Axcess with Smart Cable adapter.

Hub and Spindle

Assembly

#072 094

Spindle Support

#092 989

MIGRunner

™

XL Cart #195 246

Dimensions: 46-1/2 x W: 42 x D: 35 in

Wide cart with motorcycle-type handle grips.

Holds two large gas cylinders and Coolmate

™

(when power source is mounted with face

toward handles) for water-cooled torches. Power

supply can be mounted in several directions

while the feeder can be mounted on the top tray.

Fits Axcess 300 and 450 models only.

Note: Dual feeder not recommended for this cart. For

dual feeders we recommend using a separate feeder

cart (not available).

Wire Reel Assembly

#108 008

Spool Covers

#057 607

Reel Covers #058 256

For 60 lb (27 kg) coil. Helps to protect the welding

wire from dust and other contaminants.

Note: Reel and Spool Covers cannot be installed if

the wire drive assembly is in a rotated position.

Turntable Assembly #146 236

Allows rotation of the feeder as the operator

changes work positions. Reduces strain and

bending on the gun cable.

Hanging Bail (Electrically Isolated)

#058 435

Used for suspending feeder over work area.

Wire Straightener

#141 580

For .035–.045 in (0.9–1.1 mm) dia. wire.

#141 581

For 1/16–1/8 in (1.6– 3.2 mm) dia. wire.

Helps reduce the cast in wire to improve wire

feeding performance and increase the service

life of the gun liner and contact tip.

Dual Schedule Switches

DSS-8

#079 693

A 15 ft,

two-position

trigger switch which attaches to the gun handle

and is used in place of the standard trigger for

dual scheduling.

Adapter Cord #157 364

Required for use with DSS-8.

1ft, Y trigger

cable that connects DSS switch and control box

to the gun.

DSS-9M

#041 793

A 15 ft,

two-position

slide switch

which attaches to the gun handle and is used to

select the desired welding condition for dual

schedule purposes. The gun trigger operates as

a standard trigger.

Coolant Systems

For more information, see the Miller Coolant

Systems literature sheet, Index No. AY/7.2.

Coolmate

™

#043 007 115 VAC

#043 008 230 VAC

For use with water-cooled torches rated up to

600 amps. Unique paddle-wheel indicator,

external filter and easy-fill spout.

Coolmate

™

V3 #043 009 115 VAC

For use with water-cooled torches rated up to

500 amps. Vertical design conveniently mounts

to Miller cylinder rack in place of one cylinder.

Coolmate

™

4 #042 288 115 VAC

For use with water-cooled torches rated up to

600 amps. Tough molded polyethylene case

with carrying handle.

Low Conductivity Coolant #043 810

Sold in cases of four 1-gallon recyclable plastic

bottles. Miller coolants contain a base of

ethylene glycol and deionized water to protect

against freezing to -37˚F (-38˚C) or boiling to

227˚F (108˚C). Also contains a compound that

resists algae growth.

Genuine Miller Accessories

Learn More at MillerWelds.com/AMS

Shown

with AA-40GB.

Coolmate 3

Coolmate 4

Coolmate V3

Spindle

Support

Hub and

Spindle

Assembly

1 2 ... 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Miller Electric Axcess 450 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage Miller Electric Axcess 450