Miller Electric S-74DX Manuel du propriétaire télécharger pdf (Page 16)

OM-1500-9 Page 12

SECTION 4 − INTRODUCTION

4-1. Specifications

Type of

Input Power

Welding Power

Source Type

Wire Feed Speed

Wire Diameter

Range

Welding

Circuit Rating

Rating

Overall

Dimensions

Weight

24 Volts AC

Single-Phase

10 Amperes

50/60 Hertz

Constant Voltage

(CV)

DC With 14-Pin

And Contactor

Control

Standard: 50 To 780 ipm

(1.2 To 19.8 mpm)

Optional High Speed:

92 To 1435 ipm

(2.3 To 36.4 mpm)

Optional Low Speed:

19 to 300 ipm

(0.4 to 7.6 mpm)

Max Spool Weight:

60 lb (27 kg)

(See Section 5-6)

Max Spool Capacity:

18 in. (457 mm)

100 Volts,

750 Amperes,

100% Duty

Cycle

IP 21S Length: 27 in.

(686 mm)

Width: 12-1/2 in.

(318 mm)

Height: 14 in.

(356 mm)

45 lb

(20.4 kg)

SECTION 5 − INSTALLATION

5-1. Important Information Regarding CE Products (Sold Within The EU)

A. Information On Electromagnetic Fields (EMF)

! This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.

This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public

access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.

Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding

circuit may not be a major contributor to the EMF. See the Owner’s Manuals for all components of the welding circuit for additional EMF exposure

information.

S The EMF assessment on this equipment was conducted at 0.5 meter.

S At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.

ce-emf 1 2010-10

B. Information On Electromagnetic Compatibility (EMC)

! This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−

voltage supply system. There may be potential difficulties in ensuring electromagnetic compatibility in those locations, due to

conducted as well as radiated disturbances.

ce-emc 3 2010-10

5-2. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or

rated output. For future reference, write serial number in space provided on back cover of this manual.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Miller Electric S-74DX Manuel du propriétaire Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage Miller Electric S-74DX