Miller Electric Remote Operator Interface Manuel d'utilisateur télécharger pdf (Page 10)

Consulting Services

Field Application Support #195 480

Axcess

E systems may require factory-

trained technical support, depending on the

complexity of the application and the local

availability and capability of qualified welding

engineers or technology experts. Contact the

factory with questions. Factory support is

available at a flat rate of $1250.00 per day

(plus expenses) when scheduled more

than 10 days in advance. With less than

10-day notice, rates may be higher. Rates

are based on a 10-hour day, including travel.

One day minimum.

Axcess

E Field Upgrade Module

#300 641 Field

Upgrade your investment in standard Axcess

equipment. Standard Axcess power sources can be

upgraded to Axcess E systems with the addition of

the Axcess E field upgrade module. This module

comes with everything you need for installation.

Note: Not compatible with Auto ROI.

DeviceNet Interconnecting Feeder

Control Cables*

#242 209 005 5 ft. (1.5 m)

#242 209 010 10 ft. (3 m)

#242 209 025 25 ft. (7.6 m)

#242 209 050 50 ft. (15.2 m)

These specially designed Electrical Magnetic

Interference (EMI) protected and shielded feeder

control cables are required, but not included

with Axcess feeders or ROI. Determine length

needed and order separately.

*For additional lengths visit MillerWelds.com/equiptoweld.

Motor Control Cables*

#242 395 010 10 ft. (3 m)

#242 395 020 20 ft. (6.1 m)

#242 395 030 30 ft. (9 m)

#242 395 050 50 ft. (15.2 m)

Includes overmolded connections on high-flex

cables for optimal service life.

*For additional lengths visit MillerWelds.com/equiptoweld.

Volt-Sense Cable*

#242 208 050 50 ft. (15.2 m)

Replacement cable.

One cable supplied with

every feeder or drive motor.

*For additional lengths visit MillerWelds.com/equiptoweld.

Ethernet Network Connection Cables

#300 734 9.8 ft. (3 m)

#300 735 16.4 ft. (5 m)

#300 736 32.8 ft. (10 m)

Industrial-grade 360 degree shielded Cat 5

Ethernet cable with conventional RJ45

overmolded four-pole connector on one end to

connect to factory network, and industrial M12

overmolded connector on the other end to

attach to Axcess E power source. Cable supports

10/100 Mbits-per-second transmission rate.

ADAM DI/O Module

#300 803

Provides a digital I/O interface

for communication between a

robot /PLC and the Axcess E

power supply. The interface

allows for the interaction of a

robot or PLC and the Insight

Centerpoint application. This module is optional

for semi-automatic Axcess E models.

Axcess

E Sourcing I/O Kit

#301 150 For Axcess E and Auto-Axcess

™

Drive Roll Kits and Guides (Order from Miller Service Parts.)

Genuine Miller

Services and Accessories

Wire Size

.035 in. (0.9 mm) #151 026 — #151 052 — #243 233

.040 in. (1.0 mm) #161 190 — — — —

.045 in. (1.1/1.2 mm) #151 027 #151 037* #151 053 #151 070 #243 234*

.052 in. (1.3/1.4 mm) #151 028 — #151 054 — —

1/16 in. (1.6 mm) #151 029 #151 039 #151 055 #151 072 #243 235

.068/.072 in. (1.8 mm) — — #151 056 — —

5/64 in. (2.0 mm) — — #151 057 — —

3/32 in. (2.4 mm) — #151 041 #151 058 — —

Select drive roll kits from chart below according to type and wire size being used. Drive roll kits include four drive rolls, necessary guides and feature an anti-wear sleeve for inlet guide.

*Accommodates .045- and .047-inch (3/64-inch) wire.

“V” groove

for hard wire

“U” groove for

soft wire or

soft-shelled

cored wires

“U” groove for

aluminum

wires contains

nylon guides

“V” knurled for

hard-shelled

cored wires

“U” cogged

for extremely soft

wire or soft-shelled

cored wires (i.e.,

hard facing types)

Wire Size Inlet Guide Intermediate Guide

.035 in. (0.9 mm) #221 912 #242 417

.047 in. (1.2 mm) #221 912 #205 936

1/16 in. (1.6 mm) #221 912 #205 937

Nylon Wire Guides for Feeding Aluminum Wire

Note: “U” groove drive rolls are recommended when feeding aluminum wire.

Wire Size Inlet Guide Intermediate Guide

.023 –.040 in. (0.6 –1.0 mm) #221 030 #149 518

.045 –.052 in. (1.1 –1.4 mm) #221 030 #149 519

1/16 – 5/64 in. (1.6 – 2 mm) #221 030 #149 520

3/32 –7/64 in. (2.4 – 2.8 mm) #229 919 #149 521

Wire Guides

1 2 ... 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Miller Electric Remote Operator Interface Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Miller Electric Remote Operator Interface